Roll Fed Forming Only Machine for Sub-Contractors / OEMs

AM SERIES

The AM Series is a semi-automatic simple to use roll fed machine that uses only “vacuum” to produce parts. The material is indexed from the heating oven into the forming station using a spike chain. There is usually a single heating oven in the top side with IR lamps to heat the sheet. The forming press is pneumatic driven and has a platen size of 500 x 600 mm. Once the shot is formed it is cut using a pneumatic shot cutter. Each cavitation is separated using a separate hydraulic press as an off-line process.

MACHINE VIDEO

TFM SERIES

The TFM Series is a semi-automatic simple to use roll fed machine that uses “air pressure” upto 6 bar to produce parts. The material is indexed from the heating oven into the forming station using a spike chain. There is usually a single heating oven in the top side with IR lamps to heat the sheet. The forming press is pneumatic driven or servo motor driven and has a platen size of 500 x 600 mm. Once the shot is formed it is cut using a pneumatic shot cutter. Each cavitation is separated using a separate hydraulic press as an off-line process.

MACHINE VIDEO

Below is a video showing production of material handling trays - using PET and ESD material - using pneumatic driven pressure forming machine.

Below Video shows the TFM machine with forming area 450 x 600 mm but with servo motor driven press. The machine is able to get upto 25 cycles/min (wet) and 40 cycles/min (dry).

DOWNLOAD BROCHURE

Please fill the form the below to download the brochure

Machinecraft Technologies

505 Palm Springs, Link Road,
Malad W, Mumbai 400064, INDIA

Tel: +91-22-28817785
Email: contact@machinecraft.org